DIGITAL AMMETER READING SETTING:
In digital ammeter there is 2 button and 4 indication light.
Digital ammeter reading |
BUTTON:
1.SEL - Selector
2.ENT - Enter
INDICATION LIGHT:
1.R - Red phase
2.B - Blue phase
3.Y - Yellow phase
4.k - thousand
STEPS OF EDIT AND SETTING OF DIGITAL AMMETER:
SEL KEY: By pressing the SEL key we can check the current of each phase (R,Y,B).
Digital ammeter reading |
ENT KEY: By pressing ENT key we see the programmable mode of digital ammeter.
CT PRIMARY VALUE VIEW AND EDIT:
First time pressing ENT meter shows CT-P (C.T. primary).
Once again pressing ENT key we will see primary side CT ratio.
Now by pressing ENT we can scroll on digits and by pressing SEL key we can change the CT primary side value and after the setting of CT value,press the ENT key and back to default display.
CT SECONDARY VALUE VIEW AND EDIT:
Press ENT key we will see CT primary side value and than press SEL key we will see the display as show in image (CT secondary).
Once again pressing ENT key we will see the CT secondary value.
By pressing ENT key we can scroll on digits and by pressing SEL key we can change the value of CT secondary and after setting the CT secondary value,press the ENT key and back to default display.
Important links:
Well done
ReplyDeleteπ
ReplyDeleteNiceπ
ReplyDeleteππππ
ReplyDeleteGud
ReplyDelete